Portable Air Compressor Pump - AUPERTO 12V Digital Tire Inflator - 150 PSI Auto Tire Pump with Emergency Led Lighting for Car, Bikes, Motorcycles

Price: Click Button for Price
Product prices and availability are accurate as of 2020-09-17 00:03:34 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Features

??HD DUAL DISPLAY? 2 independent digital values: the default tire pressure and current tire pressure display on the left and right of the HD screen respectively, allowing you to clearly grasp real-time changes in tire pressure values, safer and more reliable! ??RAPID INFLATION? 120W power and 22mm cylinder diameter, greatly reducing the long inflatable time, just 4-5 minutes, and the tire can be quickly filled within 80 seconds with a small amount of air required. ??LED SETTING? 6 X 0.5W LED bulbs/3 different new functions: lighting, flashing and SOS, to solve the night emergency, add multiple guarantees for your trip. In addition, according to demand, you can manually switch LED lights, ON or OFF, and press the LED button to switch three modes freely, more environmentally friendly! ??MULTI-PURPOSE? 3 adapters and 1 fuse, not only for cars, SUVs and commercial vehicles, but also for motorcycles, bikes, lifebuoys and balls and so on. (Note: If the air pump stops working due to the fuse is damaged, means you need to replace the fuse) ??INTELLIGENT INFLATION? 4 pressure units(PSI, KPA, BAR, KG / CM), adjusting "R" to select the pressure unit .There are two types of inflation, one is to test the tire pressure and then start: pressing "+" or "-" to measure, wait until it stops blinking , then turn on the powered switch, and the compressors will automatically stop inflating once the required pressure is reached.Second, manually press "+" / "-" to set the default value, then start the switch, and done?