The Amflo 4-50E-RET yellow nylon recoil air hose has a 1/4" ID and is 50 ft. long. Its tube and cover are made of yellow nylon for resistance to moisture absorption, abrasion, fatigue, and chemicals. Its braided nylon reinforcement provides the strength necessary to reach and maintain its maximum pressure rating of 200 pounds per square inch (psi). It is capable of functioning effectively at temperatures ranging from 32 to 120 degrees F, and comes equipped with two 1/4" factory-installed, brass male National Pipe Thread Taper (NPT) swivel fittings with steel bend restrictors that reduce twisting and bending, increasing the life of the hose. This hose is manufactured as a lighter-weight alternative to bulkier rubber and plastic hoses for use in a wide range of industrial applications, such as manufacturing, auto repair, robotics, and others. Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method: S = Size (ID, OD, and length) T = Temperature (maximum and minimum temperatures of material being transported) A = Application (industry or process) M = Material (to be conveyed, type and concentration) P = Pressure (maximum working pressure) E = Ends (type of end connectors or couplings on hose) D = Delivery method (volume and velocity) The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. The hose must be capable of withstanding the minimum and maximum temperatures that occur within the hose system. Some applications require specialized oils or chemicals to be conveyed through the system.
Coiled nylon air hose for a wide range of commercial and industrial applications
Yellow nylon tube and cover for resistance to moisture absorption, abrasion, fatigue, and chemicals
Braided nylon reinforcement for strength
Temperature range of 32 to 120 degrees F